Short answer: a general home inspection flags problems; a structural inspection explains them. If the home inspector notes cracks, bowing walls, sagging floors or water damage to framing, bring in a structural engineer during your inspection period. The engineer’s findings and repair estimate help you decide, negotiate a credit, or plan a 203(k) renovation.
Home inspection vs. structural inspection
A home inspector looks at the whole house: roof, plumbing, electrical, heating and structure. When they see a structural concern, they usually recommend a structural engineer, because they cannot say how serious it is or how to fix it.
| Home inspection | Structural inspection | |
|---|---|---|
| Who | Home inspector | Licensed structural engineer |
| Scope | Whole house, visual | Framing, walls, foundation |
| Answers | What looks wrong | Why it happened and how to fix it |
| Result | Report with recommendations | Findings, repair design or letter |
Red flags in Philadelphia row houses
These are the structural issues we find most often in older Philadelphia homes:
- Bowed rear or front walls. Brick walls pulling away from the floors. See our guide to bowing walls in row houses.
- Sagging bay windows. Second-floor bays on older row houses often sag as the framing under them rots.
- Rotted joists under bathrooms. Years of small leaks under tubs and toilets.
- Walls removed without a beam. Open floor plans from past flips, sometimes done without permits.
- Cracked or wet foundations. Stone foundations with washed-out mortar. See which foundation cracks to worry about.
- Fire or water damage next door. Shared party walls and roofs can be affected.
- Fresh paint over cracks. New finishes can hide movement. Ask what was done and when.
Found something during your home inspection? We can visit with a Pennsylvania-licensed engineer and price the repair before your deadline. See our structural engineering and repair service.
What the structural engineer checks
A typical structural visit covers:
- Foundation and basement walls. Cracks, bowing, water and settlement.
- Framing. Joists, beams, posts and the signs of cuts, rot or overloading.
- Masonry walls. Bulging, cracks, loose brick and the condition of party walls.
- Roof framing. Sagging rafters and past fire or water damage.
- Past renovations. Removed walls, new openings and additions.
You get written findings and, when needed, a repair recommendation. Ask for this in writing; lenders and insurers often want it.
Check permits and violations too
Before you buy, look up the address on the City of Philadelphia Atlas map to see past permits, and ask the seller about any L&I violations. Big structural changes with no permit are a warning sign. Open violations stay with the property, and Unsafe or Imminently Dangerous violations come with short deadlines. Read what to do with an L&I violation notice.
Using the results: negotiate, walk away or renovate
With the engineer’s findings and a contractor’s estimate, you can:
1. Negotiate
Ask for a price reduction or a repair credit based on a written estimate.
2. Ask for repairs
Have the seller fix it before closing, with permits and an engineer’s sign-off.
3. Finance the repair
With a 203(k) loan, structural repairs generally need the Standard 203(k), not the Limited.
4. Walk away
If the repair is bigger than the deal can carry.
As a Philadelphia 203k contractor, we price structural repairs for renovation loans every week.
Buying a home with structural questions?
We inspect with a Pennsylvania-licensed engineer and give you a written repair estimate fast. Philadelphia contractor license #43984.
Structural inspection FAQs
Do I need a structural inspection when buying a house in Philadelphia?
Not always. Add one when the home inspector flags cracks, bowing walls, sagging floors, water damage to framing, or past wall removals.
What is the difference between a home inspection and a structural inspection?
A home inspector checks the whole house visually. A structural engineer examines the framing, walls and foundation, explains the cause and recommends a fix.
What is a structural letter?
A written report from a licensed engineer on the condition of the structure or a specific repair. Lenders, insurers and buyers often ask for one.
When should I schedule it?
During your inspection contingency period, as soon as the home inspection flags a concern.
Can a 203(k) loan cover structural repairs?
Yes. Structural repairs generally need the Standard 203(k). We can price the work for your loan.
Related guides and services
Sources: City of Philadelphia, violation and order types. Rules change, so always check your notice and confirm with L&I.

0 Comments