Short answer: thin vertical cracks in poured concrete are usually shrinkage and not serious. Cracks that are wide, growing, horizontal, stair-stepped, offset, or that come with a bowing wall or sticking doors upstairs point to movement and need a structural inspection. Many older Philadelphia row houses sit on stone foundations, where washed-out mortar and water are the usual problems.
Know your foundation type
How a crack is read depends on what the wall is made of:
- Stone foundations. Common in older row houses. Rubble stone set in soft lime mortar. The stones rarely fail; the mortar washes out, the wall gets damp, and sections can loosen or bulge.
- Concrete block (CMU). Common in mid-century homes and additions. Watch for stair-step and horizontal cracks.
- Poured concrete. Common in newer homes and additions. Thin vertical cracks are normal shrinkage.
- Brick. Some basements and many above-grade walls. Stair-step cracks in the mortar show movement.
Cracks that are usually minor
These are common and often just need sealing and watching:
- Hairline vertical cracks in poured concrete, often near windows or the middle of a wall.
- Small cracks in a concrete floor slab from shrinkage, with no height difference across the crack.
- Old cracks that do not change over months. Mark the ends with a pencil and the date to track them.
Cracks that need an engineer
Call for a structural inspection if you see:
- Horizontal cracks in a block wall. Soil and water pressure can push the wall inward. This is one of the most serious signs.
- Stair-step cracks in block or brick, especially if they widen at one end.
- Wide or offset cracks. One side of the crack sticks out further than the other.
- A wall that bows or leans. Check with a long level or a string line.
- Cracks that keep growing, or reopen after patching.
- Signs upstairs. Sticking doors, sloping floors and new cracks in walls above the problem area.
Not sure about a crack? Send us photos. Our team and a Pennsylvania-licensed engineer can inspect it. See our structural engineering and repair service.
How foundation problems are repaired
The fix always starts with the cause, usually water:
- Drainage first. Downspouts, grading, gutters and leaking pipes. Many cracks stop moving once water is managed.
- Repointing stone walls. Washed-out joints are cleaned and refilled with a compatible mortar.
- Crack injection and sealing. Stops water through stable cracks in poured concrete.
- Wall reinforcement. Steel braces, carbon fiber straps or wall anchors stop a bowing block wall.
- Rebuilding sections. Badly damaged block or stone sections are taken down and rebuilt, with shoring.
- Underpinning. Extending the foundation deeper, often when lowering a basement floor or after settlement.
- Waterproofing. Interior drains and sump pumps keep water from coming back. See our basement waterproofing guide.
Permits, neighbors and underpinning
Structural foundation repairs need an L&I building permit with a licensed design professional. In row houses, the foundation is often shared, so work can affect the house next door. L&I can require protection of the adjacent property and special inspections, and it requires a licensed excavation contractor for excavation more than 5 feet below the neighboring grade, including underpinning. Talk to your neighbors early.
Planning to finish or lower the basement? Fix the foundation first. See our basement remodeling service.
Seeing cracks in your foundation?
We inspect the foundation with an engineer, explain what the cracks mean and fix the cause. Philadelphia contractor license #43984.
Foundation crack FAQs
Are foundation cracks normal?
Thin vertical cracks in poured concrete are usually normal shrinkage. Horizontal, stair-step, wide, offset or growing cracks are not and should be inspected.
What kind of foundation does a Philadelphia row house have?
Many older row houses have stone foundations set in lime mortar. Newer homes and additions often have block or poured concrete.
Is a horizontal crack in a basement wall serious?
In a block wall, yes. It usually means soil and water pressure are pushing the wall in, and it needs an engineer.
How do you fix a bowing basement wall?
Fix the drainage, then reinforce the wall with steel braces, anchors or carbon fiber, or rebuild the worst section.
Do I need a permit for foundation repair in Philadelphia?
Structural foundation work needs an L&I building permit with a licensed design professional. Underpinning near neighbors has extra rules.
Related guides and services
Sources: City of Philadelphia, get a make safe permit; L&I, make safe permits and inspection requirements (Nov 2024). Rules change, so always check your notice and confirm with L&I.

0 Comments